How should glasses fit?
Glasses that fit sit level, stay put when you look down, and do not press anywhere. In practice that means five checks: the frame is about as wide as your face at the temples, your eyes sit near the centre of each lens, the bridge rests on your nose without pinching or leaving deep marks, the arms run straight back and curve gently behind the ears without squeezing your head, and the lenses do not rest on your cheeks when you smile. An optician can adjust most frames so they pass these checks; they are general guidance, not a fitting.
Try glasses on your own photo — free
The five checks
- Width: the frame front roughly matches the width of your face at the temples. Gaps between the arms and your head, or arms bowing outwards, mean it is too wide or too narrow.
- Eyes in the lenses: your pupils sit near the middle of each lens, a little above centre for many frames, not crowded toward the nose or the outer edge.
- Bridge: the frame rests on the nose without pinching, sliding or leaving deep red marks after an hour.
- Arms: straight back to the ears, then a gentle curve behind them. They should not dig in above the ears or press on the sides of your head.
- Cheeks and brows: lenses clear your cheeks when you smile, and the top of the frame sits around the brow line rather than far above it.
Quick tests at home
- Look down at your feet and shake your head gently: the glasses should not slide.
- Smile widely: the bottom of the frame should not lift off your nose on your cheeks.
- Wear them for an hour: no headache at the temples, no sore spots behind the ears.
- Look in a mirror straight on: the frame sits level, not tilted to one side.
What the numbers say
Frames print three numbers inside an arm, such as 52□18-140: lens width, bridge width and arm length in millimetres. A pair that already fits you well is your best guide; what the numbers on glasses mean explains each. In the FitMyFace glasses tool you can type the three numbers printed inside the arm of a pair you already wear; it lists frames from all its stores nearest that size first. The face scan also estimates a frame width from your photo; it is an estimate, not a measurement by an optician.
When to see an optician
Most fit problems are adjustments, not a wrong frame: an optician can bend the arms, angle the front, or change or add nose pads, often while you wait. Prescription details such as pupillary distance and, for progressives, fitting height should be measured by an optician; see what is pupillary distance? The FitMyFace preview shows how a frame looks on your photo; it is approximate and cannot tell you how a frame will feel.
FitMyFace frame previews are approximate and not professional optical fittings; they are not a substitute for an optician. Ordinary try-ons perform face analysis on-device. The optional AI previews send a 500 px square of your photo to our AI (Cloudflare) and it is deleted right after; it is never stored. Your consent is the one "I agree" on the scan screen, and a switch on the results turns the AI off. For adults 18 and over. Not available in Illinois.
Quick answers
Should glasses touch your cheeks?
No. If the lenses rest on your cheeks, especially when you smile, the frame may sit too low or need nose pads. See glasses touching cheeks.
Where should my eyebrows be with glasses?
A common guideline is that the top of the frame sits around or just below the brow line. It is a convention; comfort and your view come first.
Should glasses be tight behind the ears?
They should hold without squeezing. Pressure behind or above the ears usually means the arms need adjusting or are too short.
Can I try frames on my own photo first?
You can preview frames on your own photo with FitMyFace; the picture is approximate, not a fitting. It is free, for adults 18 and over, and not available in Illinois.